Open Skip Containers

The most universal solution for waste collection. The combination of a low loading edge on one side (max. 1 200 mm) and a higher opposite side provides a good compromise between manual loading and transport volume. The pivoting hook for emptying is on the side of the low end.

Two construction variants:

— Lightweight version — frame from bent U-profiles. Suitable for lighter waste and less intensive use.

— Heavy version — frame from rolled UNP profiles. For construction waste, rubble and aggressive environments.

The loading edge of the low end is reinforced with a double rolled profile. This part of the container is the most exposed — in practice it is precisely the top edge of the low side that suffers mechanical damage during loading. The double reinforcement significantly extends the container lifespan.

Best for: Collection yards and operations where the container is loaded alternately by hand and by machine.

• Low edge — manual loading of heavy loads up to 1 200 mm
• Universal use — manual and mechanised loading
• Two construction variants per use intensity

• Reduced volume compared to symmetric variants
• Pivoting hook only on one side — correct orientation required during loading

Both sides have equal height with lowered ends. Pivoting hooks on both sides allow emptying from any side without rotating the container.

Best for: Operations with frequent manual loading and flexible logistics where bidirectional access matters.

• Pivoting hooks on both sides — no orientation issues
• Lowered ends — comfortable manual loading from both sides
• Even load distribution

• Reduced transport volume due to bidirectionally bevelled ends

Symmetric construction and even top edge enable full utilisation of transport volume. Pivoting hooks on both sides allow bidirectional emptying.

Best for: Operations with predominantly mechanised loading where volume matters more than loading edge height. From 10 m³ upwards we recommend exclusively machine loading.

• Maximum transport volume of all open types
• Pivoting hooks on both sides

• With increasing volume the height grows — worse manual loading
• Over 10 m³ only machine loading

Watertight skip for transport of sludge, liquids and sediments. Asymmetric design with watertight welds. Inside are 4 longitudinal and 3 transverse L-profiles — forming a grid that serves as a baffle during transport. The entire construction is reinforced for extreme load. For high-corrosion environments we recommend increased plate thickness.

Based on NMSV construction, reinforced for dynamic load during crane handling. Forged lifting eyes with 7-ton capacity per eye. Symmetric design is necessary for even weight distribution during lifting.

Two construction variants:

— Light version — side walls 4 mm, floor 6 mm. Capacity up to 10 000 kg. Suitable for lighter waste and smaller crane loads.

— Heavy version — side walls 6 mm, floor 8 mm. Capacity up to 12 000 kg. For construction waste, rubble and extreme loads.

Best for: Transhipment, dumps, rail terminals and construction sites where containers are moved by crane.

• Integrated crane attachments — safe crane handling
• Forged lifting eyes with 7 t/eye capacity
• Two variants per required capacity (10 t / 12 t)
• Symmetric construction — even load distribution during lifting

• Only 5 and 7 m³ — limited volume range
• Higher weight due to reinforced construction

Skip type common in the Vienna region. The hinged doors allow entry into the container with a wheelbarrow or lighter mechanism. The low height allows manual loading from all sides. Around the perimeter, exclusively rolled profile is used for increased impact resistance. The doors are deliberately lowered — they must be robust enough for daily use but at the same time light enough so the operator can safely close them without assistance.

Door construction: 4 strong hinges with grease nipples, galvanised hooks, reinforced frame. Side closing ensures reliable securing during transport.